The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device meets the automotive requirements for high-speed (1 Mb/s), low quiescent current, electromagnetic compatibility (EMC) and electrostatic discharge (ESD). The device family members are: ? MCP2561 with SPLIT pin ? MCP2562 with VIO pin

  Supports 1 Mb/s operation

  Implements ISO-11898-5 standard physical layerrequirements

  AEC-Q100 Grade 0

  Very low standby current (Typ: 5μA)

  VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O

  SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes

  CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus

  Detection of ground fault; Permanent dominant detection on TXD, Permanent dominant detection on bus

  Power-on Reset and voltage brown-out protectionon VDD and VIO pin

  Protection against damage due to short-circuitconditions (positive or negative battery voltage)

  Protection against high-voltage transients in automotive environments

  Automatic Thermal Shutdown protection

  Suitable for 12V and 24V systems

  Up to 112 nodes can be connected

  High-noise immunity due to differential bus implementation

  High ESD protection on CANH and CANL, IEC61000-4-2 > 8kV

  Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L.

  Temperature ranges; Extended (E): -40°C to +125°C, High (H): -40°C to +150°C